
Concrete driveway building
A new driveway for your house, poured over a base we dig out and pack so it isn't sitting on loose dirt, with joints cut where we want any cracks to go.
Precision Hermiston Concrete builds concrete for homeowners and commercial property owners, and we put the most care into what you can't see once it's poured: the base, the joints and the cure.

Precision Hermiston Concrete is a concrete contractor in Hermiston, OR. We handle 16 kinds of work, from a driveway that's sinking or cracked to footings for a new building. The price mostly comes down to size and thickness, how much old concrete comes out, how much digging and base the ground needs, and the finish. Stamped or colored work takes longer than a plain broom finish, the light texture that gives it grip. The schedule turns on the weather, what the city needs before we start and the cure, the days the slab sits before you use it. I walk the job and measure it, and the written estimate gives you your number.

A new driveway for your house, poured over a base we dig out and pack so it isn't sitting on loose dirt, with joints cut where we want any cracks to go.

Patios for the back yard, built so water runs away from your house instead of toward it, with a broom or smooth finish that suits how you'll use it.

Stamped concrete is pressed with a pattern and color while it's still wet. It's for homeowners who want the look of stone or brick on a patio or walk without loose pieces.

Walks to your door and along the street, poured the way I learned on a city crew, with a slight fall so water runs off instead of sitting there.

A new or replacement garage floor for your house, poured over a packed base and finished smooth enough to sweep, with joints cut so any cracking stays in straight lines.

Color, exposed stone and custom edges for concrete that should look good as well as work. We talk them through at the estimate so you see the choices before we pour.

Poured walls that hold back soil where your yard changes level, built on footings with drainage behind them so water doesn't build up and push against the wall.

Interior concrete floors for shops, barns, basements and commercial space, finished smooth or textured depending on what will be driven, rolled or walked across them.

Decks around a pool, finished with texture so wet feet have grip and sloped so splash water drains away from the pool instead of standing on the surface.

Front and back steps with every step the same height so nobody catches a toe, tied in where they meet the walk and finished with grip.

Slab foundations for homes, shops and outbuildings, laid out to the plans and poured on a packed subgrade, the ground the slab sits on, so the building starts level.

Foundations for new homes, additions and commercial buildings, formed and poured to the plans. We sort out the city paperwork our part needs before we dig.

Parking lots and drive lanes for businesses and property owners, poured thick enough for the traffic they'll carry and sloped so rain runs to the drains.

Footings for walls, posts, decks and new buildings, dug to the depth the plans or the inspector call for, so whatever sits on top has a firm start.

For a slab or foundation that has sunk or tipped. We look at why it moved first, then work to bring it back toward level.

Straight, clean cuts through existing concrete for new doorways, plumbing runs, joints or removing a section, so the part that stays isn't broken up with a hammer.
I learned concrete on a municipal crew. We poured curb, sidewalk and street patches that had to pass a public inspector, and I started this business in Hermiston in 2017. I still come out to write the estimate and run the job myself, so what we agree on at your place is what gets built.
What I care about most is the part you can't see once it's poured. The base is usually the first thing cut when a budget gets tight. I'd rather spend there than on a fancier finish, because a nice surface on loose dirt still sinks and cracks. You can read more about how we work.
We're used to working along the street and dealing with the city office. The permits our part of the job calls for are sorted out before the first pour, not halfway through.
We cut control joints, shallow grooves that tell the slab where to crack, while it's still fresh. Then we give it time to cure so the top stays hard instead of turning weak and dusty.
We're licensed and insured, and our promise is satisfaction guaranteed on every job. I'd rather tell you straight what a job needs than sell you something extra.
Here's what happens from your first call or form to the day I check the finished concrete with you.
Call (458) 219-6758 or send the form with a few lines about the job. We get back to you within one business day to set a time.
I come out, look at the site, measure it and ask the questions that matter for that kind of job. Then I write you a free estimate with no obligation.
If you go ahead, we sort out what the city needs from us and my crew does the work. I check it over with you before we call it done.
These photos show finishes and layouts to talk over at your estimate, from plain broom texture to stamped patterns, colors and borders.
Send the form and we'll get back to you within one business day to set up a visit. I'll walk the job and write up what it needs, and there's no obligation to book.
Mention what's going on now, like cracks, sinking or water pooling by the house. That way I come out with the right questions and a sense of what has to come out.
The written estimate spells out the digging, base, thickness and joints, not just the finish, so you can compare it fairly against another bid.
We take calls from homeowners and from property owners who need a lot, footings or a foundation put in, so the same form works for either.
Here are straight answers to what people ask most about concrete cost, timing, cracking and the city rules in Hermiston.
It depends on your driveway, and I give you a written number after I walk it and measure it. Beyond size and finish, the big swings are whether an old slab has to be broken out and hauled off, how close the truck can get and how much digging the ground needs. I won't cut the base to bring the price down, because you'd pay for that later.
You can usually walk on new concrete well before you can drive on it. That's because it keeps gaining strength for days while it cures. The wait depends on the slab and the weather, so I'll give you the timing for yours. Keep cars, trailers and heavy loads off until then, since the edges are the first thing to break.
It can, but most of the cracking on old slabs comes from a base that was only raked level, water running underneath or joints cut late. We dig out and pack the base and check which way the water runs. We keep the slab falling away from the house and cut joints on time, so any cracks usually stay in the grooves.
It depends on the job, so we check rather than guess. Inside city limits the Hermiston Building Department issues building permits. Its list names new garages, carports, patio covers and similar structures over 200 square feet, plus additions and remodels. Flatwork like a driveway or patio isn't spelled out there, so when a project isn't clear cut we ask the department before we start.
Yes, in most cases. Oregon's Construction Contractors Board says state law generally requires a license for anyone paid for construction work that improves real property, and that covers concrete poured on your property. The City of Hermiston also requires a business license, renewed every year, for anyone doing business in the city, including companies based somewhere else. We're licensed and insured.
For a new structure, the Planning Department does a zoning review before the city issues the permit. Home and commercial construction also needs a blowing dust control plan before any work begins. It names someone the city can reach at any hour to deal with dust. We handle the permits and paperwork our part of the job calls for, so that's sorted before we show up.
Yes. We're based in Hermiston and work in Umatilla, Pendleton, Kennewick, WA and other cities around the area. If a project isn't clear cut, we check with the office that issues permits there before we start. If you're not sure we come out your way, ask through our contact page.
Call (458) 219-6758 or send the form with what you're planning, and I'll come out, look at the site and write up what it needs.